Edit: I don’t think my direct image upload worked: https://postimg.cc/tZS8wf04

I’ve given the name “hybrid IPAs” to IPAs that were sort of the pioneers of neipas. Think Heady Topper, Focal Banger, Julius, or Pliny the Elder. The Alchemist is my main inspiration. These beers are much more bitter than a NEIPA, are loaded up with sulfates, may or may not have oats/wheat (I’m choosing not to add any), and aggressively dry hopped. I love me a good NEIPA, but I have decided I want to brew a more west coast style NEIPA. This is my first iteration and was brewed with the leftover hops and Kveik I had on hand.

After a few days in the keg, this beer came out nicely but still isn’t quite where I want it. I was a little under on my efficiency and ended up at 7.5% abv. I think it is a little too bitter for the fruity hops used. It needs something a little more dank to hold up to the bitterness. It could use to be a bit punchier as well as far as the hop bill is concerned. It’s hoppy, but not quite the same hop saturation I am looking for. Over time I’ve come to believe that chlorides are overrated. Load up on sulfates in all IPAs if you ask me. The nose is mangos, pears, and orange, and the finish is like bitter tang in a good way. Even though it’s bitter, it’s remarkably easy to drink. This keg won’t last long.

Next time, I will be using verdant ale yeast and a different mix of hops. Likely Simcoe, ctz, and Amarillo, maybe some citra. I also got some cryo Amarillo which should add some real kick to the dry hop.

Recipe for this beer:

Double IPA

8.2% / 17.7 °P Recipe by

All Grain

BrewZilla / RoboBrew 35L 68% efficiency

Batch Volume: 5.47 gal (Kettle) Fermenter Volume: 5 gal

Boil Time: 60 min

Mash Water: 6.45 gal

Sparge Water: 1.08 gal Total Water: 7.53 gal Boil Volume: 6.22 gal

Pre-Boil Gravity: 1.056

Vitals Original Gravity: 1.073

Final Gravity: 1.014

IBU (Tinseth): 153

BU/GU: 2.10

Color: 6 SRM

Mash Temperature — 149 °F — 60 min

Malts (13 lb) 13 lb (92.9%) — Thomas Fawcett Pale Malt, Maris Otter — Grain — 2.8 °L Other (1 lb 8 oz) 1 lb (7.1%) — Sugar, Table (Sucrose) — Sugar — 1.3 °L 8 oz — Briess Rice Hulls — Adjunct — 0 °L Hops (12.13 oz) 1.83 oz (71 IBU) — Magnum 11.2% — Boil — 60 min

1.5 oz (43 IBU) — Idaho #7 12.5% — Boil — 20 min

1.5 oz (25 IBU) — Mandarina Bavaria 7.2% — Boil — 20 min

1.5 oz (9 IBU) — Idaho #7 12.5% — Aroma — 20 min hopstand

1.5 oz (6 IBU) — Mandarina Bavaria 8.5% — Aroma — 20 min hopstand

4.3 oz — BRU-1 14.9% — Dry Hop — 2 days

Hopstand at 176 °F

Miscs 2 g — Calcium Chloride (CaCl2) — Mash

12 g — Gypsum (CaSO4) — Mash

0.43 g — Calcium Chloride (CaCl2) — Sparge

2.6 g — Gypsum (CaSO4) — Sparge

Yeast Kveik Blend 75% Fermentation Primary — 68 °F — 14 days

Carbonation: 2.4 CO2-vol Water Profile Ca2+ 140 Mg2+ 0 Na+ 9 Cl- 48 SO42- 277 HCO3- 9

  • SpiderShoeCult@sopuli.xyzM
    link
    fedilink
    English
    arrow-up
    1
    ·
    1 year ago

    Thanks for the write-up!

    While I’ve not really brewed IPAs on purpose (I did accidentally get a black IPA), I found that somebody on the internet was correct and some Munich malt tends to be good everywhere.

    For efficiency, I use a Braumeister (which apparently is known for the low efficiency), and what I’ve noticed is that pausing the process 2-3 times during the mash and giving it a goot stir with a big enough spoon tends to increase my efficiency. It’s a bit messy what with taking out the mesh, but I find it’s worth it. Can actually see the liquid running through the grains turn milky even after the second stir - I might be leaving some clumps in there at the start despide my best efforts.

    • bees_knees@sopuli.xyzOP
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      Yeah I do like a little Munich in a standard IPA or pale ale, but I don’t think double IPAs need much more than a darker pale malt. I think you are correct about stirring but I’m too lazy. Just going to make a slightly smaller batch next time.