If you’re saying “the B word,” then no, I can’t.

The lemmy.ml server even rejected a post I attempted that addressed this:

I can’t upload another photo, because Connect says that the image service is “down,” but it rejects with “error: slurs”

Anyway, this is my last post here. It’s been fun, lemmy.ml.

You can’t be serious. I am using lemmy.ml.

Why are there “removed” words in your comment?

This message is displayed in the browser because Google asked your browser to do it, and your browser got the message and put it there.

When displaying ads, the end user experience is 100% client-side. You are using your screen and speakers to observe it. You can turn off your speakers and screen if you want, which will effectively “block” the ad.

But that is silly. Not only do you own your screen and speakers, but you have control of what you’re browser is doing, too (if you use a respectable browser). When HTML, CSS, JavaScript, and other content is downloaded, just that happened: file downloads. After it has been downloaded, your browser then consumes it.

When it is consumed, a lot happens, but ultimately, the code in the browser displays content. Your (respectable) browser does all of this, and will change the look depending on local fonts, accessibility options, etc. With an ad block add-on, it will also remove these ads.

However, when ads are removed, the DOM is mutated with deleted or replaced content. It is possible for a website to then write ad block detection scripts to see if the ad contents have been removed or not. There are many ways to do this, and this screenshot is the result of one way of doing it.

However, enter the cat-and-mouse-chase of ad block block blocks. You can block your ads, then block the ad block block like this screenshot. These types of ad block rules are less common, but many public ones are available. Check the uBlock Origin lists in the setting page. By default, only about a third of the lists are enabled, and these extra blocks are in there.

Another avenue of determining that ads were not loaded is for the server to inspect if client-side (you) requests were made to fetch the ads. Even if this is in place, the server cannot determine if you have actually watched the ad or not. It could try to do more client-side attempts at validating that you somehow displayed it, but again, that’s client-side.

Imagine if you were sent a letter and a pamphlet in the mail. Imagine if the letter said that you could mail them back for a free sample of their product, but only if you read the pamphlet. They would have to trust that you read it, because you are reading your mail in the privacy of your own home. However, you could opt to toss the pamphlet (like an ad blocker) and never read it. It’s your mail, your home, and your choice.

If the package manager leaves you with broken dependencies, a broken system, or a system that “doesn’t work,” then there are significant bugs in how the distro has packaged things. It happens, but seldomly.

Package managers aren’t “hard.” There are GUIs where you can search and install packages, even. In my opinion, if you have a Linux user that has avoided learning how package managers work, then they’re skipping a core foundation of how to use their operating system.

You’re recommending Flatpak for users that are confused by packages?

It looks like sonarr is not in the official Ubuntu mirrors. The website mentions adding a new repo to apt. Is this what you did, or something else?

https://sonarr.tv/#downloads-v3-linux

Also, how are you starting it? I’m looking at the Arch package in the AUR (not your distro, but just looking), and I notice that it includes a .service file. This means that it would be started as a service, and not as a user, like you’re probably attempting to do.

What directory is it trying to write to? Can you show us the full error, preferably as text and not a screenshot?

What happens when you try to start it?

If there is a dependency problem in the upstream packages, then there is a bug in Ubuntu. This doesn’t happen often, and isn’t a good reason to go to Flatpak by itself. A bug should be filed upstream and it’ll likely get fixed quickly.

What did you download?

This is meta as hell. I love it.

For real. It’s so much better to think about using the screen space you already have. People can do what they want, but I am happy with one screen, a tiling window manager, and workspaces. I can have a dozen or more things going on, and have it packed on a workspace. Fullscreen a window of I need to, then pop it back.

It’s incredibly efficient. I see stuff like this, and I imagine what it’s like to have text several feet away, screens covered by other screens, lots of neck fatigue, all the monitor borders… like it’s truly bad. It feels like someone watched a lot of TV and “felt” that this was the best way to do it without trying it.

Butt I digress. It’s not my setup. If they’re efficient with it, more power to them.

From man systemd:

DESCRIPTION
       systemd is a system and service manager for Linux operating systems. When run as first process on boot
       (as PID 1), it acts as init system that brings up and maintains userspace services. Separate instances
       are started for logged-in users to start their services.

       systemd is usually not invoked directly by the user, but is installed as the /sbin/init symlink and
       started during early boot. The user manager instances are started automatically through the
       user@.service(5) service.

       For compatibility with SysV, if the binary is called as init and is not the first process on the
       machine (PID is not 1), it will execute telinit and pass all command line arguments unmodified. That
       means init and telinit are mostly equivalent when invoked from normal login sessions. See telinit(8)
       for more information.

       When run as a system instance, systemd interprets the configuration file system.conf and the files in
       system.conf.d directories; when run as a user instance, systemd interprets the configuration file
       user.conf and the files in user.conf.d directories. See systemd-system.conf(5) for more information.

Otherwise monitors, cables and video cards would have compatibility issues.

You’re right, and this was absolutely a thing. Video cards could produce whatever they were capable of, and monitors could display whatever they were also capable of. You could also push resolutions and refresh rates to monitors that was beyond the monitors’ specs, and you would also risk damaging the monitor by doing this.

I don’t think you were pushing 4000x3000 resolution through VGA.

You don’t need to believe me. That’s your choice. I had friends that could do the same. This was with a Matrox card and a 21" Acer CRT. The display was nearly impossible to read, and the color mask broke up the individual pixels too much, anyway.

Just like today no one is pushing video streams to giant building sized screens over consumer HDMI or DVI.

Digital video has upper limits in its specs. This is the whole point of this conversation.

Another example is XLR VS 3.5mm jack. In theory you can push audio signal of any quality over both, but XLR by spec is balanced and shielded, while 3.5mm is not. This means that XLR is capable of pushing much better audio.

A bit of incorrect information here. There is no “unshielded 3.5mm spec.” Good cables have shields, but not all. XLR doesn’t have the ability to transport higher frequencies because it’s balanced, or “much better audio.” On paper, unbalanced audio is better for short runs because there is more opportunity for XLR signals to have extremely minute signal quality issues due to the hot and cold signal mirroring, but it’s so small that it doesn’t matter.

File a bug.

https://steamcommunity.com/app/1675200/discussions/1/

In general, what is the highest frequency that can be carried over a wire?

I know it can do these resolutions in practice because I have personally operated CRTs at 4000x3000 resolution in the early 2000s. This could be considered “the 4:3 of 4K.” It was not done on fancy equipment or high-end monitors. Analog stuff really could just go to really high resolutions and refresh rates with above-average, but typical stuff.

CRTs simply respond to waveforms for red, green, blue, vertical sync, and horizonal sync. That’s it. If you want more horizonal pixels, make your scan lines denser. If you want more vertical pixels, add more scan lines. Want a faster refresh rate? Simply run all the signals faster.

There is no hard upper limit to it. With digital signals, there are throughput limits per spec due to bit rates, but with analog, there are no bits. Resolutions like 40k x 30k are theoretically possible. The difficult parts are rendering the signal at these high frequencies, and being able to meaningfully display them. The VGA connection itself has no limits.

It’s analog. It always has.

Wow, what a horrible setup.