Oh totally. But they don’t sync that information “immediately”. Nor would they ever want to because then the user would know that’s where the information came from.

Looks like you got phished. Doubt that was the real bank site. Suggest you change your passwords if you logged in to that site, too.

In my opinion, the difference with Google is that Google is actively using your data and you’re giving them a lot of it. For Cloudflare, what do they have exactly? Depends on what services you use, but really all they get from me is the list of servers that connect to my domains. Google does that too if you use 8.8.8.8, or if you have any of their hardware that overrides router DNS settings like Chromecast and Google TV.

I mean it depends on the intensity of the surge, but basically you’d be making it so your PSU is unable to protect the devices from surges. The more sensitive the electronics, the more critical the ground is and CPUs are pretty darned sensitive among other things. And depending on the type of components in the PSU, “surges” also include things like inrush current. Basically, when you turn on a transformer or certain other devices, there is a surge of sometimes as much as 10 times the rated current to create the initial magnetic flux. Depending on the components, this excess energy may end up getting shunted to the ground to avoid pushing it through your electronics. So if it can’t do that, you likely will blow fuses a lot when switching the power on (hopefully there are fuses), or if you’re touching the case which is supposed to be grounded, you may end up getting that jolt.

Anyway, without grounded outlets, and especially if your electronics are cheaply made because many expect there to be grounding and don’t build in extra components to deal with not having a ground, you are likely to significantly reduce the life of your electronics, your life, or start a fire without even considering major surges. If you have a high-end PSU, you may never have a problem until that surge happens. How stable is your power? Because even a normally small surge combined with a cheap PSU, and no ground, is pretty likely to end up in damage to electronics at the best case.

Automate as much as possible. I rsync to both an online and home NAS for all of my hosted stuff, both at home and in the cloud. Updates for the OS and low level libraries are automated. The other updates are generally manual, that allows me to set aside time for fixing problems that updates might cause while still getting most of the critical security updates. And my update schedules are generally during the day, so that if something doesn’t restart properly, I can fix it.

Also, whenever possible I assume a fair amount of time for updates, far beyond what it should actually take. That way I won’t be rushed to fix the problem and end up having to revert to a backup and find time later to redo it. Then most of the time I have extra time for analyzing stats to see if I can improve performance or save money with optimizations.

I’ve never had a remote provider just suddenly vanish though I use fairly well known hosts. And as for local hardware, I just have to do without until I can buy a replacement. Or if it’s going to be some time, I do have old hardware that I could set up as a makeshift, temporary replacement like old desktop computers and some hardware that I use for experimenting like my Le Potato that isn’t powerful enough for much, but ok for the short term.

And finally I’ve been moving to more container-based setups that are easier to get up and running again. I’ve been experimenting with Nomad, Docker Swarm, K3s, etc., along with Traefik and some other reverse proxies so o can keep the workers air-gapped for security.

Yeah, I had to move away from Arch Linux because lots of apps you have to build and Electron was one of the biggest culprits for using tons of disk space and time because it builds Chromium in its entirety from source. Electron is a great way to shift the cost of cross platform development from you to your customers.

Yeah, I’ve been having a lot of issues with Electron which is basically a browser emulator. It has gotten huge, so applications using it have gotten out of control in size. I get that it’s a quick way to build a cross platform application, but there really needs to either be a better way to distribute it that is more modular, or people need to start building on better cross platform front-end systems.

Google knows what you like and these days they will take any ad because they fired all the screening staff. My ads are usually pretty average since I opt out of everything I possibly can opt out of and I use Startpage for search, so they aren’t as targeted. That’s one positive thing about Google. They started as a relatively ethical company for an ad company, so there’s a lot of code and best practices in place for opting out of things. That is fading, but it’s way better than others. Like Facebook showing ads for things I searched for a few seconds ago on Amazon and stuff like that.

If everything you’re measuring is lower than expected, you should check the calibration of the scale. Weigh 2 or 3 things you know the weight of that are at different ranges of weights, light, heavy, medium, and see if any are off. Often a scale will be accurate at only within a certain range and get progressively less accurate as the weight increases or decreases from that range.

Yeah, it would be nice if it was easier for devs to just turn over the project to an “official” fork. Unfortunately, I’m sure that would get abused by scammers taking over projects forcefully and adding in malware before anyone notices.

That’s not that bad, depending on where you live. Seattle rarely gets below 0C and 10C is pretty normal for a high in December.

Fault of the crappy app you’re using, not Google.

Easy enough to do with NAT unless it uses DNS over https. Then you have to block a lot more than just DNS.

Mailcow or Mailu have pretty good setups if you don’t want to do anything too different and don’t need to keep resource usage to a minimum.

Docker is nice for things that have complex installations and I want a very specific implementation that I don’t plan to tweak very much. Otherwise, it’s more hassle than it’s worth. There are lots of networking issues like limited/experimental support for IPv6, and too much is hidden and preconfigured, making it difficult to make adjustments that would otherwise just be a config file change.

So it is good for products like a mail server where you want to use the exact software they use like let’s say postfix + dovecot + roundcube + nginix + acme + MySQL + spam assassin + amavisd, etc. But you want to use an existing reverse proxy and cert it setup, or want to use a different spam filter or database and it becomes a huge hassle.

They’re just doing what discogs did with music. They’ll create contracts with media companies to allow them to claim that all the info in their DB is copyrighted. Eventhough most of it was user created, it is technically mostly copyrighted data. And then they’ll start the legal campaigns to eliminate any competition. They’ll progressively make it more difficult to access and more difficult to update or get things corrected and it will become frustratingly bad but the only game in town.

That’s exactly what the model is trying to learn.

Actually, what I’m saying was that there shouldn’t be a need for a tip at all. That 18% service charge is for services rendered outside of the production of the product, meaning the server, cashier, etc. In most countries that’s rolled into the cost of the product, not a separate charge. In the US, that’s paid for through tips instead. What they’re doing is trying to double dip. They want to keep the money that normally would go to paying the service staff a wage without raising advertised prices and also have a separate tip to actually pay them.

This is a classic bait and switch where advertised price is not what you actually pay. Doesn’t matter if they put a little sign to cover their legal obligations, it’s still disingenuous to advertise one price and charge another. Tipping and taxes are common knowledge in the US as being added on after, but a service charge in addition to tipping is not and most people will assume that the service charge is a tip and won’t also tip whereas it doesn’t go directly to the service staff like a tip does. So likely in this place, the service staff just gets their $2.13/hr or whatever the tipped minimum is there, and a few dollars here and there in actual tips but doesn’t get any of that 18% unless tips don’t cover the required hourly $5.12 tip credit.

So they need to choose. Raise your prices for more profit and keep tipping, raise your prices to pay your service staff and do away with tipping, or keep your prices lower and risk tipping not covering the minimum wage tip credit.

Basically, they just raised their prices by 18% and blamed it on the greedy, useless employees. I don’t know why businesses bother selflessly “creating jobs” if they are so much trouble. Shouldn’t those be the first things to cut to make their business more efficient under capitalism? Stop doing charity work and run the business yourself.

I would normally be ok with paying for a service that offered something I valued if it meant they weren’t also going to make money from me as a product. This pretty much just says it won’t use your data for displaying ads. That’s the least important thing to me. I am more concerned with them selling my data or giving my data to organization that are planning to harm me with it. If an app was actually useful and being updated with new user centered features rather than only new monetization features and additionally would agree not to sell my data, ever, and to let me actually delete that data on request, I’d be happy to pay that much.