I’ve seen people talking about it and experienced it myself with a server, but why does Linux run so well on ARM (especially compared to Windows)?

  • BCsven@lemmy.ca
    7·
    1 year ago

    Raspberry pi works fine with linux, cutiePi also. my iomega nas is an arm board running debian…i don’t see the issue

      • BCsven@lemmy.ca
        41·
        1 year ago

        The issue with Arm is they aren’t all one board/chip, you have ARM based design licenced from them and they are built to meet the criteria of what the customer requires. i.e. for my iomega NAS there isn’t firmware boot, you just have to generate an empty section of 00s on the first 32bytes of the drive so the board knows that is the drive to load the kernel from (no grub no uboot) and the board is set to do the rest from the next partition.

          • Bene7rddso@feddit.de
            2·
            1 year ago

            Booting isn’t the only problem with ARM. Instead of saving information about builtin devices on the board and exposing it via ACPI, board manufacturers create a devicetree and ship it with the kernel. This means that if you want to run your own kernel you need to build your own devicetree

          • BCsven@lemmy.ca
            2·
            1 year ago

            But all x86 instructions are the same right, thus why it doesnt matter what era your chip is from or what manufacturer, arm can be very different

            • Skull giver@popplesburger.hilciferous.nl
              2·
              1 year ago

              x64 has all kinds of vendor exclusive instructions sets (AVX-512 and SEV-SNP for example). The solution for most programs and compilers is to either be conservative (only including the most common instruction sets) or to compile code to multiple different paths depending on what extensions are available (resulting in larger binaries that can use more modern features).

              For a while, I rented a dedicated server for cheap that was running a first generation i7. Performance was fine for web server stuff, but the lack of AES acceleration was definitely annoying and several times I’ve run into attempts to run SSE instructions that the processor simply couldn’t run. I’ve also run into instruction set annoyances when trying to run pre-compiled machine learning tools that assumed functional AVX instructions that my desktop doesn’t understand.

              Most ARM devices run Armv8-A or these days Armv9-A, with possibly some extensions. There’s also the special ARM Thumb (which is a requirement for some platform code) but that’s supported by most ARM chips as well. Like on x64, there are a few optional extensions (like Neon for SIMD, or Apple’s additions to make Rosetta2 work as well as it does).

              The instruction sets match enough that distros like Debian and Alpine have most of their packages available for ARM (aarch64). Once you get a kernel loaded and the system up and running, you can grab generic binaries from standard distros and run a normal Linux system without ever having to recompile your userland code.

              The biggest problem on ARM remains getting a working kernel and getting it to boot.

    • pewpew@feddit.it
      2·
      1 year ago

      Theese devices support linux out of the box. Try installing a proper linux distro on your phone and good luck finding a graphics driver that is not sotware rendering

      • BCsven@lemmy.ca
        1·
        1 year ago

        As did microsofts arm device support windows, which is the point zi was replying to with skullgiver. of course windows works if the arm version was built for the hardware it runs on.