First off, sorry if this isn’t quite the right community, I did try posting on [email protected] but didn’t get a solution. You can see that post here
I have my computer set up to dual boot pop!_os and windows on separate drives. I have my UEFI set up to boot into pop OS and I use systemd-boot to load windows, however after booting to windows and restarting my UEFI boot preferences are changed so Windows boots first instead of pop os.
I have fast boot and secure boot turned off in the bios and fast boot turned off in windows. How can I prevent this?
deleted by creator
I’m a little confused about what I’m meant to be doing in this part
You’ll need to find the partition number and the reference to the disk in /dev for your boot partition /dev/disk/by-partuuid/172a0183-3a89-4b78-b1b3-d016ca6675f7. You can try using ls -l /dev/disk/by-partuuid/172a0183-3a89-4b78-b1b3-d016ca6675f7 to see where it points (i.e. for /dev/sdb2 you would use --disk /dev/sdb --part 2).
I also, get this error “invalid numeric value Y” when trying to manually register systemd-boot
The weird long /dev/disk/… I used comes straight from your Pastebin. It’s a unique link to the your EFI partition, but sadly
efibootmgrcan’t use that to register your bootloader. The Arch wiki example command leavesXandYfor you to fill in, and you need to find theXandYfor your system to make it work. They’re different for every computer so I can’t tell you what they are.On my system, the EFI partition is
/dev/disk/by-partuuid/2fbab938-cc71-407a-996a-874d4486fca8. I used thelscommand to find the right information in my example above, butrealpathis probably better, so I’ll use that in this comment.I can find out the right
XandYfor my system using the following command:user@ desktop ~ $ realpath /dev/disk/by-partuuid/2fbab938-cc71-407a-996a-874d4486fca8 /dev/sde1As you can see,
/dev/disk/by-partuuid/2fbab938-cc71-407a-996a-874d4486fca8actually points to/dev/sde1. That means my disk (“X”) issdeand my partition number (Y) is1.What this means in my case is that I would need to issue the following command to register
systemd-boot:sudo efibootmgr --create --disk /dev/sde --part 1 --loader "\EFI\systemd\systemd-bootx64.efi" --label "Pop_OS" --unicodeNotice how I filled in the
eforXin/dev/sdXand1forY.After running the registration command, I get the following output:
BootCurrent: 0014 Timeout: 1 seconds BootOrder: 0004,0003,0000,0015 Boot0000* Windows Boot Manager Boot0001 Hard Drive Boot0002 USB KEY Boot0003* ubuntu Boot000E Hard Drive Boot0010 USB KEY Boot0015 Hard Drive Boot0004* Pop_OSIgnore all the weird device names, my motherboard injects those into the configuration. The important part is that my computer’s boot order is
0004(Pop_OS),0003(ubuntu),0000(Windows Boot Manager), and lastly0015(a random hard drive). This is the order of bootloaders my computer will try before throwing up a “no bootable device” error. The asterisks next to the name indicate that they’re enabled somewhere in the boot order.These numbers will look different on your computer. What you’ll probably want to do, is copy the bootorder as listed by the command that added the
Pop_OSboot entry and add the number of your new bootloader in front.Suppose I want to change my system to try to boot
Pop_OSfirst, thenubuntu, thenWindows Boot Manager. I can do that without booting into my BIOS through the following command:sudo efibootmgr --bootorder 0004,0003,0000You can pick any order, but I would advice not removing any unless you know what you’re doing.
I understand now. I now have a pop OS boot entry, and it’s set as first boot priority. However, I’m still having the original issue of windows putting itself first on the boot priority after rebooting from windows.
Edit: after another reboot the pop_os boot entry I just made has vanished
deleted by creator
Could updating my bios and all that help with this issue?
[This comment has been deleted by an automated system]
lsblk -o NAME,SIZE,MOUNTPOINTS,UUIDtry this command, it will show you what partitions you have on the machine then modify previous command with correct labels and UUIDsometimes you need to modify the command
sudo efibootmgr --create --disk /dev/sdX --part Y --loader “\EFI\systemd\systemd-bootx64.efi” --label “Pop_OS” --unicode
/dev/sdX --part Y needs to be replaced with correct labels for partitions, If you are lost just paste the output of thelsblk -o NAME,SIZE,MOUNTPOINTS,UUIDcommandThanks for explaining, I’m still quite new to Linux in general
Change boot order in UEFI and then save your changes. It did the trick for me last time windows screw me over
That’s what I’m doing, but it gets changed again every time I boot to windows
Hi I am not a linux pro, but for me a quick fix what worked was to disable Windows boot. basically everytime windows boot it puts itself as priority, but cannot any more this way. I would then use the grub menu at boot to select what os i needed. I use mint but since both are based on ubuntu should work in the same way. found this online, more or less what i did: https://unix.stackexchange.com/questions/241809/grub2-gone-every-time-i-boot-windows-10 https://unix.stackexchange.com/questions/68581/how-can-i-prevent-windows-from-overwriting-grub-when-using-a-dual-boot-machine
My solution years ago when windows used to do this to me with a dual boot was to move windows to a virtual machine instead, which works great for me!
Would recommend as much ram as possible though. I find performance great with 16gb of ram to share between host and the vm.
Windows updates would often mess up boot prior to me switching. Very annoying.
What VM software would you recommend? The issue I always run into is GPU acceleration whenever I use the usual virt-manager or VirtualBox.
Virt-manager is my preferred but I only have integrated graphics anyway.
My solution to this was to just set the boot order how I wanted it and then lock it from BIOS
I had a similar issue, and no changes made in Linux would stick. Bootice is a Windows program that allows you to make changes in UEFI boot order and was the only solution that worked for me. Good luck!
