This is not a conversation about guns. This is a conversation about items that have withstood abuse that are near unbreakable.
Some items I have heard referenced as AK47 of:
Gerber MP600: It’s a multi tool
Old Thinkpad Laptops
Mag lights
Toyota Hilux
panasonic microwave from 1996. I hope i don’t jinx it by posting about it here. Gigabyte Ultra Durable mainboards. IBM Model M keyboard PROXXON tools
Also, this is an old meme, and a bit outdated for our times, but no one has mentioned it so ill do it. The Nokia 3310. Truly the AK-47 of phones.
My 99 honda civic had nearly 250,000 miles on it the day that it was stolen. When it was found, the thieves had gutted the dashboard of electronics and had removed wheels and other parts. When it was discovered by the police, they towed it to the city in-pound lot and failed to contact me for a couple days because the license plate had been painted over for some reason.
Unfortunately the lot and towing fees ended up being more than what I paid for the car. I wasnt very well off at the time, so I surrendered it to the city. I assumed it would be scrapped for parts.
6 months later it was served to me in ad for Facebook Marketplace. Some guy had fixed it up and had been driving it regularly for months with no issue.
I still wish that I had bought it from him. I fuckin loved that car. I used it to deliver pizzas for 2 years, so i wasnt even that easy on it. I never had a major engine or transmission issue with it and the minor issues that I had were easy for me to fix myself. I bet it’s still running out there somewhere.
Should have gone to court over it. It was stolen, not your fault at all.
There’s magic in those old 90s Hondas, I’ve seen it. I had a stripped valve cover bolt and couldn’t figure out how I could fix it short of a head replacement. The answer? Plug it with a rubber and metal washer sandwich and a bolt, and tighten the ones next to it a lil more. Never leaked. Thing was a champ
I think every Swedish household i’ve ever been in has owned the same Moccamaster coffee brewer for over 15 years. My parents have had the same one for over 20 years probably, swear those are indestructible.
The P4$.FL 44 BF.A OBVIOUSLY guys why has no one mentioned it? Jesus Christ it’s like you want them to break!
^The comments in this thread
Carolina Outdoor Work Boots.
Like wearing a bulletproof vest on your feet.
Thank you for the recommendation :)
I’ve been searching for steel toes ever since I was burned by Red Wings.
Sony MDR-V6. I’ve had them for 15+ years, only had to change ear pads to velour ones after the first 5 years of use, after that 10+ years, no issues.
That metal toaster we got for a wedding present. It was apparently someone’s parents wedding present from the 60’s. We had it for several years until a friend jammed a bagel in it and melted the cord. I replaced the cord and we used it for another several years before losing it in a move.
I like to believe someone found it and it is still toasting to this day.
Was it one of those automatic toasters? Technology connections made a video on it.
Aeropress coffee maker.
Its like 20$, works really well, very simple design with few things to break.
What’s a French press? I’ve only seen drip pots in my life so I’m completely ignorant to the coffee world.
It’s like a small pitcher with a movable filter, you put in the ground coffee, hit water, stir, wait, push down the filter with the grounds, pour off the coffee with most of the ground staying in the French press.
So why not use a dripper? I’ve always wanted to get into coffee and want to try an espresso so bad lol
So why not use a dripper?
Whereas a drip just passes through the coffee, a French Press is more of a steep. You get a stronger taste from it than you would on a drip.
Espresso is a whole other thing, expensive to get into at home. It uses a much finer grind and (IIRC) the water is pushed through under pressure.
Wild. That’s kinda intricate coffee for most people is just a simple process and keep moving. Thanks for the knowledge! I appreciate the write up.
French press is basically the same work as a drip machine, but a different shape. You just heat the water seperately and then pour it and the coffee into the French press, let it sit, press the plunger down, and pour. Actually takes slightly less time than any cheap dropper I’ve used and runs 0 risk of burning the coffee (drip machines like to put heating elements into their bases to keep the pot hot, this can burn the coffee and ruin the flavor, French presses cannot burn coffee because they cannot add heat)
Espresso is finely ground coffee that uses steam pressure to brew (thus why espresso machines are fucking expensive, my mr coffee unit was 80 buck), it’s an involved process (worth learning gif you’ve got 20m to make a cup of coffee every time) but very good if you use beans you like AND you like your coffee flavor strong
Thanks for the detailed right up. I’m actually thinking of trying a French press now that several of you have taught me the mechanics. Seems a lot better than an old dripper but not so slow like an espresso. I Just thought those were cool because the tiny cup 😂
I switched to a French Press recently-ish. Instead of 4 or 5 cups of weaker coffee from my single serve drip thingie, I have 2 strong cups from my French Press and am ready to go. I’m thinking about trying a pourover to see how that is. Espresso is tasty and strong, but I don’t think I’d want it NEARLY enough to justify a machine. I usually only do espresso when I’m traveling, makes me feel fancy having a latte in the big city haha.
All that said, coffee is very individual. There is no “right” answer. If you’re happy with drip, than drip is the way. :)
If you want pseudo espresso grab a moka pot. You can snag them for like $20-50 and they make a good strong espresso style brew on your stove.
There is a Sub-Lem for that: https://slrpnk.net/c/buyitforlife
Thank you!
I thought we called them communities, but honestly I like sub-lem better. Let’s switch if we haven’t already.
Gotta be the KitchenAid mixers no? Especially the older ones. I have a friend that has one from his grandma that’s over 50 years old. If anything breaks, it’s usually a gear or something simple to fix, and the parts are easy to buy and generally cheap.
The mixers are not exactly cheap though… and their other stuff is now mostly made from plastic (like the food processors for example)
I’ve managed to get a hold of 3 of the old ones through garage or estate sales, but yeah the ones that are brand new have plastic parts in them which drives me crazy. But you can at least 3d print what you’re missing
Shure SM58/57
SM57s still can get roughed up pretty bad with the plastic covering on the front of the mic (especially if miking a snare drum with a less than precise drummer). SM58 will survive a nuclear war.
Bodum French Press
Dynavap DHV
Buffalo Bicycles
Vitamix Blender
I can’t find “DHV”, I guess that’s an old model? What would you recommend for something modern that “just works”?
DHV = dry herb vape.
All the dynavaps share the same rip so pick any one you like. I just use the basic stainless one.
If I were to get a new one today I would likely get the TinyMight v2. However I cannot speak for its reliability as I don’t have one.
Concept2 rowing machines. Even if they break, you can still buy spare parts at reasonable rates even for the very first model, which is decades old and only sold a few copies. Fantastic engineering.
Hold their value like crazy too even if you don’t like them you likely lose nothing if not very very little.
It’s a real baader-meinhoff phenomenon: once you notice them, you notice that every gym has them.
Pre-2010 Toyota Corolla
Camry too.
